Table of Contents
Advertisement
Available languages
Available languages
6.
Do not put any object into openings. Do not
use with any opening blocked; keep free of
dust, lint, hair, and anything that may reduce
air flow.
7.
Keep hair, loose clothing, fingers, and all parts
of body away from openings and moving parts.
8.
Use extra care when cleaning on stairs.
9.
Use only the charger supplied by the manufac-
turer to recharge.
10. Do not use to pick up flammable or combusti-
ble liquids, such as gasoline, or use in areas
where they may be present.
Do not pick up anything that is burning or
11.
smoking, such as cigarettes, matches, or hot
ashes.
12. Do not use without dust bag in place when
collecting dust.
13. Use extra care when cleaning on stairs.
SAVE THESE
INSTRUCTIONS.
This appliance is intended for both household use and
commercial use.
Cordless Blower Safety
Instructions
Preparation
1.
Always wear substantial footwear and long
trousers while operating the machine.
2.
Do not wear loose clothing or jewellery that
can be drawn into the air inlet. Keep long hair
away from the air inlets.
3.
Always use protective goggles, a cap and
mask when using the machine. Ordinary eye or
sun glasses are NOT safety glasses.
4.
To prevent dust irritation the wearing of a face
mask is recommended.
While operating the machine, always wear
5.
non-slip and protective footwear. Non-skid,
closed-toed safety boots and shoes will reduce the
risk of injury.
Operation
1.
Never operate the machine while people, espe-
cially children, or pets are nearby.
Switch off the machine and remove the battery
2.
cartridge and make sure that all moving parts
have come to a complete stop
whenever you leave the machine.
•
•
before clearing blockages.
•
before checking, cleaning or working on
the machine.
if the machine starts to vibrate
•
abnormally.
whenever you convert the machine from
•
blower to vacuum, and vice versa.
3.
Operate the machine only in daylight or in
good artificial light.
4.
Do not overreach and keep proper balance and
footing at all times.
5.
When using the machine for blower operation,
never blow debris in the direction of bystand-
ers. When using the machine for vacuuming
operation, be careful not to blow debris in the
direction of bystanders with the exhausted
wind from the dust bag.
Operate the machine in a recommended posi-
6.
tion and on a firm surface.
7.
Do not operate the machine at high places.
8.
Never point the nozzle at anyone in the vicinity
when using the machine.
9.
Never block suction inlet and/or blower outlet.
•
Be careful not to block suction inlet or
blower outlet with dust or dirt when oper-
ating in dusty area.
•
Do not use nozzles other than the nozzles
provided by Makita.
•
Do not use the blower to inflate balls,
rubber boat or the similar.
10. Do not operate the machine near open window,
etc.
Operating the machine only at reasonable
11.
hours is recommended - not early in the
morning or late at night when people might be
disturbed.
12. Using rakes and brooms to loosen debris
before blowing is recommended.
13. If the machine strikes any foreign objects or
should start making any unusual noise or
vibration, immediately switch off the machine
to stop it. Remove the battery cartridge from
the machine and inspect the machine for
damage before restarting and operating the
machine. If the machine is damaged, ask
Makita Authorized Service Centers for repair.
14. Do not insert fingers or other objects into
suction inlet or blower outlet.
15. Prevent unintentional starting. Ensure the
switch is in the off-position before inserting
battery cartridge, picking up or carrying the
machine. Carrying the machine with your fin-
ger on the switch or energizing the machine
that has the switch on invites accidents.
16. Never blow or vacuum dangerous materials,
such as nails, fragments of glass, or blades.
17. Do not operate the machine near flammable
materials.
18. Avoid operating the machine for a long time in
low temperature environment.
19. Always use the dust bag when collecting dust,
chips and the like.
20. Do not collect still smoldering cigarette ashes,
freshly cut metals shavings, screws, nails and
the like.
Maintenance and storage
1.
Keep all nuts, bolts and screws tight to be sure
the machine is in safe working condition.
If the parts are worn or damaged, replace them
2.
with parts provided by Makita.
Store the machine in a dry place out of the
3.
reach of children.
3 ENGLISH
Advertisement
Table of Contents
