14
www.aeg.com
8. MAKING CAPPUCCINOS AND MILK-BASED COFFEES
8.1 Using the hot water/steam
spout
8.2 Using the milk container
1. Remove the lid (ig. 16 Quick Guide);
2. Fill the milk container (B8) with a
suicient quantity o milk, not exceed-
ing the MAX level marked on the con-
tainer. Each mark on the side o the
container corresponds to about 100
ml o milk;
For a denser more even roth,
you must use skimmed or partially
skimmed milk at rerigerator tem-
perature (about 5°C).
I "Energy Saving" mode is ena-
bled, you may have to wait a ew
seconds beore the beverage is
delivered.
3. Make sure the milk intake tube is
9. FAVOURITE
The aroma, quantity and milk% o the
drinks can be saved according the pre-
erences.
The Favourite button on the panel allows
correctly inserted in the bottom o
the milk container lid (ig. 16 Quick
Guide);
4. Place the lid back on the milk con-
tainer;
5. Remove the hot water/steam spout
(B6);
6. Attach the milk container (B8) to the
connection nozzle (A5) and push as
ar as it will go (ig. 17 Quick Guide).
7. Place a suiciently large cup under
the coee spouts (A7) and rothed
milk spout. Adjust the length o the
milk spout. To move it nearer the
cup, simply pull it downwards (ig. 18
Quick Guide).
8. Follow the instructions below or each
unction.
Turn the roth adjustment dial on the
milk container lid to adjust the amount o
roth on the milk delivered while making
milk-based coees. Follow the tips in the
table below:
Dial posi-
Description
tion
No
roth
Min. roth
Max. roth
To avoid milk with poor roth or
large bubbles, always clean the
milk container lid and hot water
connection nozzle as described in
sections 10.10 / 10.11 / 10.12.
the user to prepare their avourite bever-
age with a single touch.
This eature allows the User to save the
current settings. (The recipe and any
Recommended
or...
CAFFE LATTE /
HOT MILK
LATTE
MACCHIATO
CAPPUCCINO /
MILK (FROTHED
MILK)