Omega BSG 6500R User Manual page 47

EN
AC operation
1. Start the engine.
2. Switch ON the AC circuit breaker.
3. Plug in the appliance.
NOTICE
• Be sure that all appliances are in good working order before connecting them to the generator. If an appliance begins to operate
abnormally, becomes sluggish, or stops suddenly, turn off the engine switch immediately. Then disconnect the appliance and
examine it for signs of malfunction.
• Most motorized appliances require more that rated wattage for startup. Do not exceed the current limit specified for any one
receptacle. If an overloaded circuit causes the AC circuit breaker to switch OFF, reduce the electrical load on the circuit, wait a
few minutes and then reset the circuit breaker.
4. PRE-OPERATION CHECK
Engine oil
NOTICE
Engine oil is a major factor affecting engine performance and service life. Non-detergent and 2-stroke engine oils
will damage the engine and are not recommended. Check the oil level BEFORE EACH USE with the generator on
a level surface and the engine stopped.
Use 4-stroke motor oil that meets or exceeds the requirements for API service classification SJ. Always check the API SERVICE
label on the oil container to be sure it includes the letters SJ.
SAE 10W-30 is recommended for general, all-temperature use. Other viscosities shown in the chart may be used when the
average temperature in your area is within the indicated range.
Ambient temperature
7