Set Up Speakers; Set Up Easylink (Hdmi-Cec Control) - Philips HTB3550/93 User Manual

Option 3: Connect audio through
analog audio cables
Basic quality audio
1
Using an analog cable, connect the AUDIO
IN-AUX connectors on your home
theater to the AUDIO OUT connectors
on the TV or other device.

Set up speakers

Set up the speakers manually to experience
customized surround sound.
Before you start
Make the necessary connections described in
the quick start guide, and then switch the TV to
the correct source for your home theater.
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Audio] > [Speaker setup].
4
Enter the distance for each speaker, and
then listen to the test tones and change
the volume. Experiment with the speaker
positions to find the ideal setting.
10 EN
Set up EasyLink (HDMI-CEC
control)
This home theater supports Philips EasyLink,
which uses the HDMI-CEC (Consumer
Electronics Control) protocol. EasyLink-compliant
devices that are connected through HDMI can
be controlled by a single remote control.
VCR
•
•
Before you start
•
•
Enable EasyLink
1
2
3
4
Note
Depending on the manufacturer, HDMI-
CEC is known by many names. For
information on your device, see the user
manual of the device.
Philips does not guarantee 100%
interoperability with all HDMI-CEC devices.
Connect your home theater to the HDMI-
CEC compliant device through HDMI
connection.
Make the necessary connections described
in the quick start guide, and then switch
the TV to the correct source for your
home theater.
Press (Home).
Select [Setup], and then press OK.
Select [EasyLink] > [EasyLink] > [On] .
On your TV and other connected devices,
turn on HDMI-CEC control. For details, see
the user manual of the TV or other devices.
• On your TV, set the audio output to
'Amplifier' (instead of TV speakers).
For details, see the TV user manual.