Set Up Speakers; Set Up Easylink (Hdmi-Cec Control) - Philips HTB7530D User Manual

Set up speakers

When you set up your home theater for the first
time, the setup menu prompts you to set up your
speakers for surround sound experience. If you
move your speakers, or change the layout or room,
set up your speakers again in one of the following
ways:
•
Manual setup: Set up the speakers manually
through the home theater setup menu.
•
Smartphone setup: Use your smartphone
to set up your speakers using Philips feature
called SurroundMe.
Before you start
Make the necessary connections described in the
quick start guide, and then switch the TV to the
correct source for your home theater.
Manual setup
Set up the speakers manually to experience
customized surround sound.
Before you start
Make the necessary connections described in the
quick start guide, and then switch the TV to the
correct source for your home theater.
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Audio] > [Speaker setup]
4
Enter the distance for each speaker, and
then listen to the test tones and change
the volume. Experiment with the speaker
positions to find the ideal setting.
Smartphone setup (SurroundMe)
Using an interactive menu on your smartphone,
SurroundMe optimizes the surround sound based
on your speaker positions and other acoustic
factors.
Even if you do not place the speakers in the
recommended position, or do not use all the
speakers, SurroundMe optimizes the sound
experience for you.
1
On your mobile device, set up the control
application, MyRemote (MyRemote).
2
Access MyRemote (MyRemote) application.
EN
12
3
Select your home theater from the home
screen (see 'Personalize the network name'
on page 14).
4
Tap the Sound (Sound) tab at the bottom
of the screen, and then tap SurroundMe
(SurroundMe) icon.
5
Follow the onscreen instructions to set up
your sound experience.
Set up EasyLink (HDMI-CEC
control)
This home theater supports Philips EasyLink,
which uses the HDMI-CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices that
are connected through HDMI can be controlled
by a single remote control.
Note
•
Depending on the manufacturer, HDMI-CEC is
known by many names. For information on your
device, see the user manual of the device.
•
Philips does not guarantee 100% interoperability
with all HDMI-CEC devices.
Before you start
•
Connect your home theater to the HDMI-
CEC compliant device through HDMI
connection.
•
Make the necessary connections described in
the quick start guide, and then switch the TV
to the correct source for your home theater.
Enable EasyLink
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [EasyLink] > [EasyLink] > [On] .
4
On your TV and other connected devices,
turn on HDMI-CEC control. For details, see
the user manual of the TV or other devices.
•
On your TV, set the audio output to
'Amplifier' (instead of TV speakers). For
details, see the TV user manual.