Cisco MDS 9000 Series Installing page 14

Hide thumbs Also See for MDS 9000 Series:

Table of Contents

Installing the Cisco MDS 9148T Switch

Installing the Switch into a 2-Post Rack

Figure 7: Installing the Switch onto the 2-Post Rack From the Front Side of the Chassis

Figure 8: Installing the Switch onto the 2-Post Rack From the Rear Side of the Chassis

c. Tighten the 10-32 screws to 20 in-lb (2.26 N.m) or tighten the 12-24 screws to 30 in-lb (3.39 N.m).

Installing the Cisco MDS 9148T Switch

Table of Contents

Mds 9148t