Tips On How To Get The Best Results; Troubleshooting - AEG CLEAN 6000 Instruction Book

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 15

TIPS ON HOW TO GET THE BEST RESULTS

NOZZLE/ACCESSORY
USE FOR:
3in1 accessory tool
3 tools in 1:
1. Dusting tool for hard surfaces (bookshelves, skirting boards etc).
2. Upholstery tool for textiles (curtains, upholstery etc).
3. Crevice tool for narrow spaces (behind radiators etc).
Universal nozzle:
PrecisionFlow nozzle
• For all floor types, secures best dust pick up on both carpets and hard floors.
• Change nozzle setting with the pedal. Icon will show recommended floor type.
Upholstery nozzle:
Upholstery nozzle
Use the upholstery nozzle for sofas, curtains, lightweight fabrics etc. Reduce suction power if necessary.
Models with manual power regulation – follow graphics on cleaner for optimal performance.

TROUBLESHOOTING

PROBLEM
SOLUTION
• Check that the cable is connected to the mains.
The vacuum cleaner
• Check that the plug and cable are not damaged.
does not start
• Check for a blown fuse.
The s-bag® indicator
• Check if the s-bag® is full or blocked.
light is illuminated
• If you have already changed the s-bag®, change the motor filter.
The cleaner might be overheated: disconnect it from the mains; check if the nozzle, tube, hose or filters
The cleaner stops
are blocked. Let the cleaner cool down for 30 minutes before plugging it in again.
If the cleaner still does not work, contact an authorized AEG service centre.
• Check if the s-bag® is full or blocked.
• Check if the motor filter is clogged and needs changing.
Reduction of suction
• Check if nozzle is blocked and needs to be cleared.
capacity versus
• Check if hose is blocked by squeezing it gently. However, be careful in case the obstruction has
normal
been caused by glass or needles caught inside the hose.
Note: The warranty does not cover any damage to the hose caused by cleaning it.
Water has been
It will be necessary to replace the motor at an authorized AEG service centre.
sucked into the
Damage to the motor caused by the penetration of water is not covered by the warranty.
vacuum cleaner
For any further problems, contact an authorized AEG service centre.
21
DE
DE
DE
GB
GB
GB
ES
ES
ES
PT
PT
PT
FR
FR
FR
NL
NL
NL
IT
IT
IT

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ab61c2dbAb61h6sw

Table of Contents