Breville BRITA HotCup Manual page 6

CLEANING
Always switch off and unplug your HotCup
completely cool before cleaning. Never immerse the main body, power base, power
cord or plug in water or any other liquid. Do not use harsh abrasives, chemicals or
oven cleaners.
Emptying your HotCup water dispenser
™
1. Fill your HotCup water dispenser with a quantity of water that just covers the
™
perforated stainless steel element cover.
2. Place a suitable cup or container below the dispensing nozzle. Set the dispense
control to the setting.
3. Press the start button.
4. After the water has been dispensed, empty the cup and replace it under the
dispensing nozzle.
5. Press the start button again.
6. Discard the water.
Your HotCup water dispenser is now empty.
™
If your HotCup water dispenser will not be used for an extended period (e.g. if you are
™
on holiday), we recommend that you first empty it.
Before using your HotCup water dispenser again, carry out several boil cycles
™
discarding the water each time.
Cleaning
Clean the exterior surface of your HotCup
polish it with a soft, dry cloth. Do not use steel wool pads or harsh/abrasive cleaners.
10
VKJ367_22EM1 (UK).indd 10-11 VKJ367_22EM1 (UK).indd 10-11
™ water dispenser and allow it to
™ water dispenser with a damp cloth and then
Stainless steel
element cover
11
3/3/2022 2:44:43 PM 3/3/2022 2:44:43 PM