Grizzly H6167 Instructions

To reduce the risk of serious personal injury
while using this winch:
1. Always wear ANSI approved eye protec-
tion when operating the winch.
2. Be sure the cable is not damaged. If the
cable shows any signs of fraying or any
other damage, do not use the winch.
3. Do not exceed the pulling capacities of
the winch.
4. Do not stand in line with cable while
operating the winch. If the cable breaks
it will whip back along this line.
5. Keep all loose clothing, hair, jewelry
and hands away from winch during
operation.
6. Use a spotter to help ensure safety
when using the winch. Be sure the spot-
ter is out of the way of the vehicle and
the cable before operating the winch.
7. Do not replace the cable with one of
lesser strength.
8. Do not loop the cable around an object
and back to itself. Use a chain or towing
strap if necessary.
9. Do not use the winch to lift vertical
loads. It is designed for horizontal loads
only. Lifting vertical loads may cause
the winch to fail and drop the load.
10. Do not use the winch to support loads
for long periods of time.
11. Avoid dynamic loading caused by yank-
ing or jerking of the cable. This may
cause the winch to release its load.
WARNINg: NO pORTION OF THIS MANUAL MAy BE REpRODUCED IN ANy SHApE
OR FORM WITHOUT THE WRITTEN AppROvAL OF gRIzzLy INDUSTRIAL, INC.
CoPyRiGHT © oCToBeR, 2008 By GRizzLy inDuSTRiaL, inC.
#JB11231 PRinTeD in CHina
Get other manuals https://www.bkmanuals.com
MODEL H6167
2000 LB. WINCH
w/STEEL CABLE
INSTRUCTIONS
Figure 1 Model H6167.
.
If you need help with your new item, call our Tech
Support at: (570) 546-9663.
Specifications
Horizontal Pulling Capacity ................. 2000 Lbs.
Cable ............................................. 32' x
Ratchet ................. Two-Direction with Freewheel
Gear Ratios ........................................4:1 and 8:1
Mounting Bolt Hole Size ..................................
Bolt Grade .............................................. Grade 8
⁄ " Steel
1
4
⁄ "
3
8