Display Color Change On Channel - Motorola APX 8000 User Manual

MN001422A01-AW
Chapter 4 : Status Indicators
You Hear Tone Name
Critical Fall Alert Con-
tinuous Tone
Unique Enhanced Zone Bank
Low-High Up
Tone
Unique Enhanced Zone Bank
High-Low Down
Tone
4.6

Display Color Change On Channel

This feature provides visual channel identification for users to have a quick visual recognition on a
particular channel.
Your radio must be programmed to allow you to use this feature.
For Model 3.5 and Model 2.5, when changing channels, the radio backlight on top display, radio
keypad, and accessories (DRSM or keypad Mic) changes to the programmed color.
The backlight on top display changes to white. If connected to accessories, the DRSM backlight
changes to white and the keypad mic backlight changes to green for the following scenarios:
• When changing to or powering up on invalid channels such as unprogrammed channels, receiver
frequency error channel and blank channels.
• The radio is in radio stun or radio lock mode.
NOTE: Radio stun or radio lock mode is only applicable to Model 3.5.
For hard key zeroize, key loading, and scan list programming, the backlight follows the home channel
backlight color.
30
Heard
When radio is in Fall Alert Enhanced mode and pre-
pares to transmit Emergency Alarm when the timer of
this alarm ends.
When EZB Up button is pressed to scroll the Enhance
Zone Bank up.
When EZB Down button is pressed to scroll the En-
hance Zone Bank down.