Additional Information - Panasonic TH-32MS600H Operating Instructions Manual

Additional
Information
Auto power standby function
The TV will automatically go into Standby mode in the
following conditions:
No signal is received for 15 minutes.
[Sleep timer ] is active in the [System] menu (p. 15 ).
Input signal that can be displayed
Signal name
525 (480) / 60i, 60p
625 (576) / 50i, 50p
750 (720) / 60p, 50p
1,125 (1,080) / 60i, 50i
1,125 (1,080) / 60p, 50p, 24p
Mark : Applicable input signal
Signals other than above may not be displayed
properly.
The above signals are reformatted for optimal viewing
on your display.
HDMI connection
This TV incorporates HDMI™ technology. HDMI
(high-definition multimedia interface) is the world's first
complete digital consumer AV interface complying with
a non-compression standard.
HDMI allows you to enjoy high-definition digital images
and high-quality sound by connecting the TV and the
equipment.
■
Applicable HDMI features
Input audio signal:
2ch Linear PCM (sampling frequencies - 48 kHz,
44.1 kHz, 32 kHz)
Input video signal:
"Input signal that can be displayed" (p. 17)
Match the output setting of the digital equipment.
USB Flash Memory
For playing back in Media Player
Format: FAT32
Compliance:
Supports only USB1.1 or USB2.0 standard.
Maximum USB capacity supported is 1TB.
Note
●
Data modified with a PC may not be displayed.
●
Do not remove the device while the TV is accessing
data. Otherwise this can damage the device or TV.
●
Do not touch the pins on the device.
●
Insert the device in the correct direction. Otherwise this
can damage device or TV.
●
Electrical interference, static electricity, or erroneous
operation may damage the data or device. Panasonic
is not liable for any deterioration or damage of data or
device during operations with the TV.
●
It is recommended to connect the USB Flash Memory
directly to the TV's USB port.
●
Some USB devices or USB HUB may not be used with
this TV.
●
You cannot connect any devices by using USB card
reader.
●
Additional information for USB devices may be on the
HDMI
following website. (English only)
http://panasonic.jp/support/global/cs/tv/
●If you need to expand the memory, you can format the
USB expansion memory.
Home > Settings > Device Preferences > Storage >
VendorCo USB drive > Delete and format as devices
torage
If want to restore USB functionality, following below
format again.
Home > Settings > Device Preferences > Storage >
VendorCo USB drive > Erase & format as removable
storage
* This operation has the risk of damaging the USB,
please proceed with caution.
Supported file format in Media Player
■
Document
PDF
■
Image Decoder
JPG/JPEG
■
Video Decoder
H.265/H.264/MPEG1/MPEG2/MPEG4/XviD/VC1/AV1；
■
Audio Decoder
AC4/AC3/MP3/AAC/WMA；
■
Subtitles
– The video file and subtitles text file are inside the
same folder, and the file names are the same except
for the file extensions.
– If there are more than one subtitles text file inside
the same folder, they are displayed in the following
order of priority: ".srt", ".sub".
Note
●
Even if these conditions are fulfilled, some files may
not play depending on how they are encoded.
●
Do not use two-byte characters or other special codes
for data.
●
Connected devices may become unusable with this TV
if the file or folder names are changed.
17