Panasonic accepts no responsibility for malfunctions caused by misuse or use of the product, and other problems or damages caused by use of this product. Panasonic accepts no responsibility for the loss, etc., ● of data caused by disasters. ●...
● Do not use an unapproved pedestal / mounting with this TV. equipment. Be sure to ask your local Panasonic dealer ● Do not use the pedestal if it becomes warped or to perform the setup or installation of approved wall- physically damaged.
Page 4
■ ■ Moving the TV Ventilation Caution Caution Before moving the TV, disconnect all cables. Allow sufficient space around the TV in order to help prevent excessive heat, which could lead to early failure of some electronic components. ● Move the TV with at least two people.
Setting Up the TV Attaching the pedestal Supplied accessories Operating Instructions Remote Control • RC730P (p. 10) Batteries (AAA) × 2 Removing the pedestal from the TV (p. 5) Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the Pedestal Lay the TV on a foam mat or thick soft cloth on a (p.
Connecting the TV Wall mounting the TV (optional) Please contact your local Panasonic dealer to purchase the ● Please ensure the TV is disconnected from the recommended wall-hanging bracket. mains socket/ power point before attaching or disconnecting any RF/ AV leads.
Page 7
Aerial RF cable Ω Using AV terminals Equipment AV IN MiNi AV Cable Use HDMI 1 to connect to an extension with ARC(Audio return channel) capability the sound. Enjoy the sound of external devices in multichannel sound (e.g. Dolby digital) 5.1CH), connect the device to the loudspeaker.
Note: If you don’t want to use your Android device to Initial Setup setup the TV,you will skip to Step 3.If you want to use your Android device to setup the TV, please turn on the When you first turn on the TV, a series of steps will pop- Bluetooth functions of your Android phone, then find and up to guide you to setup your TV.
Page 9
Initial Setting Initial setup involves selecting all the settings required Step 1: 2 3 4 to be able to search for and store all the analogue channels you can receive. Home Environment Make sure that the television is switched on and follow Shop Home Please choose your Environment...
Operating the TV Using the remote control Remote Control Functions Most of your television's functions are available via the menus that appear on the screen. The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings. (On/Off button) Turns the TV on or off POWER To enter the picture mode.
Page 11
To mute and un-mute the sound MUTE To show the text TEXT (This button is not used for this model) To show the subtitles STTL Channel up / down Select the digital key number To enter the media player MEDIA PLAYER Audio description (This button is not used for this model) How to Pair Remote Control with the TV...
Page 12
Using the TV controls Indicators on the TV Power On /Power Off The TV is off, short press the button to turn on the power. The TV is on, short press the button, the virtual button will display as shown below. When the virtual button appears, press the button briefly to switch the button key functions.
Watching External Inputs (p. 7) Connect the external equipment. Display the [Input] menu, then select the input of the connected equipment. Press OK key access. HDMI 1 Select HDMI 2 Android TV Home Note If the external equipment has an aspect adjustment function, set it to “16:9”.
Using the Menu Advanced Setting: Functions Color Temperature:To select the Normal, Cool, Warm. Dynamic Contrast:To select ON or OFF. HDMI PC/ AV Mode: To select Video, PC, Auto. Overscan:To select ON or OFF Using Quick Access Menu Noise Reduction:To select Off,Low,Middle,High and Auto. Picture Reset:To reset the picture.
Page 15
Country/Region: HongKong (Select in Initial Setting) System Tuner Mode:Antenna Auto Scan: Press OK to start the automatic search process. The search may take a few minutes. Picture HDMI CEC Settings During the process, you can press to abort. Sleep Timer Sound Manual Scan: Use ▲/▼...
Media Player allows you to enjoy photo, music or video Document Video Photo Music Disk recorded on a USB Flash Memory. The picture may not appear correctly on this TV depending on the digital cameras used. Display may take some time when there are many files and folders in the USB Flash Memory.
● Electrical interference, static electricity, or erroneous The TV will automatically go into Standby mode in the operation may damage the data or device. Panasonic following conditions: is not liable for any deterioration or damage of data or No signal is received for 15 minutes.
Page 18
8.000 files and folders, however, some files and folders might not be accessible. Certain files, depending on how they are encoded, may not play on the TV. Certain files are not supported on all models. DivX and DTS codecs are not supported by the Panasonic.
Point the remote control directly at the remote If the problem still persists, please contact your local control signal receiver of the TV (within about 7 m Panasonic dealer for assistance. and 30 degree angle). Situate the TV away from sunshine or block sources ...
Specifications Connection terminals AV in Model no. 32-inch model TH-32MS600H HEADPHONE 40-inch model 3.5 mm stereo mini jack x 1 TH-40MS600H HDMI 1 / 2 input Power source AC 220 - 240 V, 50/60 Hz Power consumption (Rated power / Standby power)
Page 21
Receiving channels (Analogue TV) Note VHF BAND TH-32MS600H and TH-40MS600H comply with China Terrestrial Television National Standard UHF BAND Built-in wireless LAN Standard compliance and Frequency range IEEE 802.11 a/b/g/n/ac CATV 2.4~2.5GHz and 5.15~5.825GHz Security Support for WPA/WPA2 Built-in Bluetooth Bluetooth V5.0...
Page 22
【system > settings > Oss License】 At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL V2.1 or the other...