Changing The Combination Instrument Battery; Diagnostics Connector - Husqvarna FE 450 EU 2020 Owner's Manual

15 ELECTRICAL SYSTEM
15.12
15.13
120

Changing the combination instrument battery

H03756-10
H03757-10
H03758-10

Diagnostics connector

H00933-12
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove screws with the washers.
–
Pull the combination instrument upward out of the holder.
–
Using a coin, turn protection cap
clockwise and take it off.
–
Remove combination instrument battery
–
Insert the combination instrument battery with the label fac-
ing outward.
Combination instrument battery (CR 2032) (
–
Check the O-ring of the protection cap for correct seating.
–
2
Position protection cap
using a coin.
–
Press any button on the combination instrument.
The combination instrument is activated.
–
Position the combination instrument in the holder.
–
Mount and tighten the screws with washers.
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Set the combination instrument. (
1
Diagnostics connector is located under the seat below the
EFI control unit.
p. 115)
2
all the way counter-
3
.
p. 149)
and turn all the way clockwise
p. 116)
p. 119)
p. 26)