Charging The 12-V Battery - Husqvarna FE 450 EU 2020 Owner's Manual

15.3

Charging the 12-V battery

Warning
Risk of injury 12 V batteries contain harmful substances.
–
Keep 12 V batteries out of the reach of children.
–
Keep sparks and open flames away from 12 V batteries.
–
Only charge 12 V batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging 12 V batteries.
Minimum clearance
–
Do not charge deeply discharged 12 V batteries if the charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of 12 V batteries with less than the minimum voltage correctly.
Note
Environmental hazard 12 V batteries contain environmentally hazardous materials.
–
Do not dispose of 12 V batteries as household waste.
–
Dispose of 12 V batteries at a collection point for used batteries.
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.
–
Connect positive cable
Guideline
Screw, battery termi-
nal
Info
Contact disk
and cable lug
terminal.
–
Slide the positive terminal cover over the positive terminal.
–
Connect negative cable
Guideline
Screw, battery termi-
nal
Info
Contact disk
S03584-10
and cable lug
terminal.
Finishing work
–
Mount the seat. (
–
Install the air filter box cover. (
1 m (3 ft)
9 V
ELECTRICAL SYSTEM 15
7
to the 12-V battery.
M5 2.5 Nm (1.84 lbf ft)
A
must be mounted under screw
9
with the claws toward the battery
bk
to the 12-V battery.
M5 2.5 Nm (1.84 lbf ft)
A
must be mounted under screw
9
with the claws toward the battery
p. 68)
p. 69)
8
8
111