Applications Do Not Operate Properly After A Soft Reset Is; I Cannot Use The Jog Dial™ Navigator; Error Messages; An Error Message Appears Repeatedly - Sony CLIE PEG-UX40 Frequently Asked Questions Manual

Applications do not operate properly after a soft reset is

performed
B If you encounter application problems (such as improper operations,
unusual display, or freezing during a soft reset) after you performed a reset,
the reset may not be completed properly. In such a case, perform a soft
reset once again. If you still cannot solve your problem, try a hard reset.
b
For details, refer to "Basic operations of your CLIÉ™ handheld: Restarting your
CLIÉ™ handheld" in the supplied "Read This First (Operating Instructions)".
Note on performing a reset
After performing a reset, do not press the RESET button until the
Preferences screen or the Setup screen is displayed.
I cannot use the Jog Dial™ navigator
B The Jog Dial™ navigator is not available for some applications.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Error messages

An error message appears repeatedly

B Perform a soft reset by pressing the RESET button.
b
For details, refer to "Basic operations of your CLIÉ™ handheld: Restarting your
CLIÉ™ handheld" in the supplied "Read This First (Operating Instructions)".
The message "Invalid process" appears when an
application is started
B If there is insufficient memory space in your CLIÉ handheld or storage
media, such as "Memory Stick"media, applications may not start properly.
Delete any unnecessary data (after backing up any of that data you might
need in the future) and try starting the application again.
16