Refilling Coolant - Husqvarna FE 250 Owner's Manual

Hide thumbs Also See for FE 250:
Table of Contents

Advertisement

16 COOLING SYSTEM
16.5
118
Warning
Danger of poisoning Coolant is toxic and a health hazard.
Keep coolant out of the reach of children.
Do not allow coolant to come into contact with the skin, the eyes and clothing.
Consult a doctor immediately if coolant is swallowed.
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
Change clothing if coolant spills onto your clothing.
S03566-11

Refilling coolant

Warning
Danger of poisoning Coolant is toxic and a health hazard.
Keep coolant out of the reach of children.
Do not allow coolant to come into contact with the skin, the eyes and clothing.
Consult a doctor immediately if coolant is swallowed.
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
Change clothing if coolant spills onto your clothing.
F00346-10
Condition
The engine is cold.
Position the motorcycle upright.
Place an appropriate container under the water pump cover.
1
Remove screw
. Take off radiator cap
Completely drain the coolant.
Mount and tighten screw
Guideline
Screw, water pump
cover
Main work
Make sure that the screw
Stand the vehicle upright.
Pour coolant in up to measurement
fins.
Guideline
10 mm (0.39 in)
Coolant
Refit the radiator cap.
Finishing work
Take a short test ride.
Check the coolant level. (
2
.
1
with a new seal ring.
M6
10 Nm (7.4 lbf ft)
1
is tightened.
A
above the radiator
1.2 l (1.3 qt.)
Coolant (
p. 117)
p. 145)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents