AEG DVD 4552 LCD Instruction Manual page 55

General Setup Page TV Monitor
Here you may adjust the output of the DVD-Player to match the aspect
ration of your display unit.
Background: Unless you have a wide-screen TV, the aspect ratio of your
image display is 4:3. Most movies however, have an aspect ratio of 16:9,
therefore the picture is to wide for TV playback.
You may select here how the playback of the movie will appear on your
output device:
K
4:3 Panscan: You may only view the center area of the movie. The
edges are cut off.
K
4:3 Letterbox: You may view the entire range of the movie in a re-
duced version; therefore a black bar appears on the top and bottom
of the screen.
K
16:9:
Choose this option if you have a wide-screen TV. Keep in mind
that movies recorded in an aspect ratio of 4:3 will display in the same
4:3 ratio. Therefore it will not populate the entire screen of the wide-
screen TV.
K
Wide Squeeze: Select this option, if you are using a wide screen TV
for playback. This setting adjusts films in 4:3 format to the aspect ratio
of the wide screen TV.
NOTE:
The setting "4:3 PANSCAN" is not supported by all DVDs.
Angle Mark (Camera Angle)
If the DVD contains scenes shot from different angles press the ANGLE
button (Fig. 3/21) to select one of the different camera angles. This
function is only available if the DVD contains scenes shot from different
camera angles.
Activate the function as follows:
K
On:
The angle mark is displayed.
K
Off: The angle mark is not displayed.
OSD Language
Here you select the OSD language.
Closed captions (comments)
Some DVDs contain closed captions, such as for hearing impaired per-
sons.
K
On: Closed captions are displayed.
K
Off: Closed captions are not displayed.
English
55