System Connection; Preparation For Use; Hdmi Arc Input; Optical Input - Sharp HT-SB117 Operation Manual

Sound bar home theater system
Table of Contents

Advertisement

Available languages

Available languages

System connection

■ Preparation for use

CAUTION:
TO PREVENT ELECTRIC
SHOCK, MATCH THE WIDE
BLADE OF THE PLUG TO
THE WIDE SLOT, FULLY
INSERT.
AC outlet
(AC 100 - 240V
~50/60 Hz)

■ HDMI ARC input (1)

The ARC (Audio Return Channel) function allows
you to send audio from your ARC-compliant TV to
your sound bar through a single HDMI connection.
To enjoy the ARC function, please ensure your TV
is both HDMI-CEC and ARC compliant and set up
accordingly. When correctly set up, you can use your
TV remote control to adjust the sound bar's volume
output (VOL +/- and MUTE).
Connect the HDMI cable (not included) from the unit's
HDMI (ARC) socket to the HDMI (ARC) socket on
your ARC-compliant TV. Then press the
remote control to select HDMI ARC.
Note:
Your TV must support the HDMI-CEC and ARC function.
HDMI-CEC and ARC must be set to On.

■ OPTICAL input (2)

Connect an OPTICAL cable (not included) to the TV's
OPTICAL OUT socket and the OPTICAL socket on the
unit.
Press the
button on the remote control to switch
to the OPTICAL input mode, the word "OPt" will be
shown on the display screen means to select the
Optical mode.
Note:
The external device audio output must be set to PCM.
4
1
HDMI
button
E-11
6
USB

■ LINE IN input (3)

A.
Use a RCA to 3.5mm audio cable (not included) to
connect the TV's audio output sockets to the LINE IN
socket on the unit.
B.
Use a 3.5mm to 3.5mm audio cable (not included) to
connect the TV's or external audio device headphone
socket to the LINE IN socket on the unit.
Press the
button remote control to select LINE IN,
The word "LINE" will be shown on the display screen.

■ Connect to power (4)

Please ensure that the voltage marked on the rating label,
located on the rear panel, is the same as the voltage in
your area.
Insert the end of the power lead into the AC IN socket
on the back of the unit.
Plug the other end of the cable in to the wall socket.
5
3
LINE OUT
2
OPTICAL
OUTPUT

Advertisement

Table of Contents
loading

Table of Contents