NETGEAR EAX20 User Manual page 8

Table 1. LED descriptions
LED Description
Ethernet LED • Solid white. An Ethernet device is connected to an Ethernet port.
• Off. An Ethernet device is not connected to the extender.
5 GHz LED • Solid white. The extender's 5 GHz WiFi radio is operating.
• Off. The extender's 5 GHz WiFi radio is off.
2.4 GHz LED • Solid white. The extender's 2.4 GHz WiFi radio is operating.
• Off. The extender's 2.4 GHz WiFi radio is off.
Router Link LED This LED indicates the WiFi connection between the extender and the router.
• Solid white. Best connection.
• Solid amber. Good connection.
• Solid red. Poor connection.
• Off. No connection.
WPS LED • Blinking white. A WPS connection is being established.
• Solid white. The extender network is enabled with WiFi security (either
• Off. The extender network is enabled without WiFi security.
Power LED • Solid amber. The extender is booting.
• Solid white. The extender is powered on.
• Blinking amber. The extender is resetting to its factory default settings.
• Blinking white. The firmware is corrupted.
• Off. The extender is powered off.
Overview
AX1800 4-Stream WiFi Mesh Extender
WPA, WPA2, or WPA3 WiFi security).
8 User Manual