Bosch JLR-100-069 Original Instructions Manual page 43

en-gb | 45 | JLR-100-069
1. Insert the compressed-air hose through the
compressed-air hose clamp (8).
Figure 57: Attaching the Compressed-Air Hose to the
Scissors Lift Table
1 Handle
8 Compressed-Air Hose Clamp
9 Pedal (end marked "RELEASE")
10 Pump
11 Pedal (end marked "PUMP")
12 Brake Pedal
2. Connect the compressed-air supply to the
scissors lift table.
The compressed-air connection has a 1/4 inch
external thread.
Use clean and dry compressed air with a
pneumatic input pressure only up to 6 bar
(87.02 psi).
SP04006297 | 06/2021
Figure 58: Connecting the Compressed-Air Supply
7 Bottom Frame
9 Pedal (end marked "RELEASE")
10 Pump
11 Pedal (end marked "PUMP")
12 Brake Pedal
15 Hydraulic Pressure Relief Valve
16 Compressed-Air Connection
19 Ball Valve
20 Manometer Connection
3. If necessary, unlock the padlock on the ball valve
(19). Twist the ball valve (19) until it is parallel to
the bottom frame (7) to release the platforms (3)
and (4).
4. Ensure that there are no loads on the platforms
(3) or (4).
5. Press the end of the pedal marked "PUMP" (11)
to raise the platforms (3) and (4).
Raise the platforms (3) and (4) as high as they
will go.
The pedal may briefly vibrate when pressed. This
is normal and presents no danger.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany