NETGEAR SXK50 User Manual page 96

Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
4. Select Wireless > Wireless 2.
The WiFi settings for the Wireless 2 network display on the page.
5. To enable the Wireless 2 network, select the Enable Wireless 2 network check box.
By default, the Wireless 2 network is disabled.
6. To broadcast the Wireless 2 network SSID, select the Enable SSID Broadcast check
box.
By default, the broadcast is enabled.
7. To separate the single SSID for the Wireless 2 network in an SSID for the 2.4 GHz
band and another SSID for the 5 GHz band, select the Enable SSID separation for
2.4G/5GHz check box.
For each band, a Wireless 2 Network Name (SSID) field displays. The SSID for the
5 GHz band is appended with _5G, but you can also type another name.
By default, the Wireless 2 network provides a single SSID for both bands.
8. To change the Wireless 2 network name (SSID), type a new name in the Wireless 2
Network Name (SSID) field.
The name can be up to 32 characters long and it is case-sensitive. The default SSID
is derived from the randomly generated SSID that is on the router's label. If you
change the name, make sure to write down the new name and keep it in a safe place.
9. Although the preset Employee VLAN profile for the Wireless 2 network works well
for most situations, if you want to change the VLAN profile, select the VLAN Profile
check box, and select another VLAN profile from the menu.
The preset VLAN profile name is Employee, the VLAN has ID 20, and the combination
is shown in the menu as Employee(20).
For more information about VLANs, see Manage the VLANs on page 72, including
How the router organizes LANs, VLANs, and WLANs on page 74.
10. A WLAN schedule can turn WiFi broadcast off to block network access during days
and times when it is not needed and to save energy. To enable and configure a
WLAN schedule for the admin WiFi network, do the following:
a. Select the Enable WLAN schedule check box.
The page expands and shows the days and times that the WiFi signal is broadcast.
After you enable the WLAN schedule, by default, the WiFi signal is broadcast
every day from 8:30 a.m. to 6:00 p.m.
b. To change if the WiFi signal is broadcast during a day, clear or select the check
box for the day.
If you clear the check box for a day, the WiFi signal is not broadcast on that day.
Manage the WiFi Networks 96 User Manual