NETGEAR SXK50 User Manual page 101

Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
The user name is admin. The password is the one that you set the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless > Wireless 3.
The WiFi settings for the Wireless 3 network display on the page.
5. To enable the Wireless 3 network, select the Enable Wireless 3 network check box.
By default, the Wireless 3 network is disabled.
6. To broadcast the Wireless 3 network SSID, select the Enable SSID Broadcast check
box.
By default, the broadcast is enabled.
7. To separate the single SSID for the Wireless 3 network in an SSID for the 2.4 GHz
band and another SSID for the 5 GHz band, select the Enable SSID separation for
2.4G/5GHz check box.
For each band, a Wireless 3 Network Name (SSID) field displays. The SSID for the
5 GHz band is appended with _5G, but you can also type another name.
By default, the Wireless 3 network provides a single SSID for both bands.
8. To change the Wireless 3 network name (SSID), type a new name in the Wireless 3
Network Name (SSID) field.
The name can be up to 32 characters long and it is case-sensitive. The default SSID
is derived from the randomly generated SSID that is on the router's label . If you
change the name, make sure to write down the new name and keep it in a safe place.
9. Although the preset IoT VLAN profile for the Wireless 3 network works well for most
situations, if you want to change the VLAN profile, select the VLAN Profile check
box, and select another VLAN profile from the menu.
The preset VLAN profile name is IoT, the VLAN has ID 30, and the combination is
shown in the menu as IoT(30).
For more information about VLANs, see Manage the VLANs on page 72, including
How the router organizes LANs, VLANs, and WLANs on page 74.
Manage the WiFi Networks 101 User Manual