Table of Contents
Advertisement
STORAGE
Do not store fuel/oil mix for more than 3 months.
Never place any type of storage cover on this Water Pump while it is still hot.
Prior to restarting, thaw out any possible ice from the Water Pump.
The life of this Water Pump can be extended through proper maintenance procedures. When placing this
Water Pump in storage for over fourteen days, following these procedures will increase its service life.
1. Allow engine to cool completely, and then clean the Water Pump using a cloth and mild detergent.
2. Remove any fuel from the fuel tank.
3. Disconnect the spark plug wire and remove the spark plug.
4. Pour one teaspoon of engine oil into spark plug hole and replace the spark plug but do not reconnect
the spark plug wire.
5. Gently, but firmly pull the starter cord to distribute the oil inside the cylinder, stopping when you feel
resistance.
6. Remove all water from the primer water tank.
7. Wipe all metal components with an oil-soaked rag to inhibit rust and corrosion.
8. When the engine has cooled completely, cover the Water Pump with a tarp and store in a cool, dry, well-
ventilated space out of the reach of children.
WPUMP1 1-Inch Water Pump Assembly And Operating Instructions
10
Advertisement
Table of Contents
