Static Ip Address Setting - Brother GTX600SB Instruction Manual

7-19. Static IP address setting

In the [IP Address Set] window, select the automatic acquisition or manual setting, and set up the [IP Address], [Subnet
Mask] and [Default Gateway] when you select the manual setting.
(1) From the menu, select [Printer Setting] > [IP Address Set], and press
(2) Select either [Automatic acquisition] or [Manual setting] and press
<TIPS>

If you select [Automatic acquisition], the screen will go back to the standby mode screen after the settings are automatically
acquired.
(3) To make manual settings, press
(4) To make manual settings, press
(5) When the button is pressed, the selected value is accepted, and the display screen goes to the [IP
Address], [Subnet Mask] and [Default Gateway] in sequence.
<TIPS>

The display screen shown here has been taken as an example.
IP Address Set
IP Address
1 92.168.000.001
OK to Subnet Mask Screen
IP Address Set
Automatic acquisition
Manual setting
to move to and select your desired position.
to specify your desired numeric value.
IP Address Set
Subnet Mask
2 55.255.255.000
OK to Gateway Screen
255
What to do when needed
.
.
IP Address Set
Default Gateway
0 00.000.000.000
Set OK