Operation; General; Handle Setting - Husqvarna HTC T8 Manual

HTC T8/RT8/X8/RX8

5 Operation

5.1 General

The following section describes how to change tools and how to operate the grinding
machine. This section does not deal with the technical aspects of grinding, such as selection
of grinding tools, etc.
For choice of tool, go to HTC's website

5.2 Handle setting

No. Description
1 HMI adjustment
2 Handle adjustment
3 Handlebar rough adjustment
4 Handlebar fine adjustment
D003128, 02.00
www.htc-floorsystems.com
WARNING
Risk of crushing.
Risk for personal injury.
NOTE
Ensure that the handle lock locks properly in the position
wanted when adjusting the handle.
Operation
for more information.
31