AEG DVD 4553 LCD Instruction Manual page 47

Repeat DVD-Title/Chapter
Repeat CD-Track
Repeat CD
End Repeat
DVD-Menu
Fast Forward or Rewind
Enlarge Picture
Change Picture Angle
1. Select chapter or title to be repeated.
2. Press the REPEAT button (Fig. 2/3). "Chapter" is displayed.
3. Press the REPEAT, button again until "Title" or "All" is displayed.
1. Select the track to be repeated.
2. Press the REPEAT button (Fig. 2/3). "Track" is displayed.
Press the REPEAT (Fig. 2/3) button again until "All" is displayed.
Repeatedly press the REPEAT button (Fig. 2/3), until the message disap-
pears from the screen.
Ordinarily each DVD features an individual menu. Here you may select
chapters, change settings, etc. This menu is CD specific, therefore no
additional information is available.
Press the MENU button (Fig. 2/13), to start the DVD-menu. Navigate
the menu using the navigation buttons (Fig. 2/20). Confirm the entry by
pressing the OK button (Fig. 2/19).
If you are in a menu area that enables you to select a chapter directly you
may use the numeric buttons (Fig. 2/23) on your remote control to make
your selection.
The DVD-Player features a fast forward and rewind option.
1. Press or (Fig. 2/17) to start fast forward or rewind. The current
direction and speed are displayed, e.g. " 2x".
2. Press the or , button repeatedly to change the speed. The speed
may be accelerated by factor 2, 4, 8, 16 or 32.
3. Press the " " button (Fig. 2/10) to continue normal play upon
reaching the desired passage.
Upon viewing DVDs, VCDs or pictures you may modify the picture ap-
pearance.
Press ZOOM button (Fig. 2/8), to modify the picture segment. Press the
button repeatedly to select the applicable zoom-factor or to return to the
default zoom-factor.
NOTE:
You may navigate within the zoomed picture using the navigation but-
tons (Fig. 2/20).
Some DVDs offer the option to select the picture angle independently.
Keep the SUBTITLE button pressed (Fig. 2/11) to change the visual angle.
NOTE:
If modification of the picture angle is not possible the screen will display
an error message " ".
Press and hold down the button repeatedly to select another picture
angle or return to the default picture angle.
English
47