Safety Instructions; General Information On This Chapter; Intended Use - Bosch Rexroth 3DREP 6 XE Series Operation Manual

Abbreviation Meaning
IEC International Electrotechnical Commission
RE Rexroth document
IP Ingress protection rating
A, B Hydraulic connections (actuator)
T Hydraulic connection (tank)
P Hydraulic connection (pump)
ANSI American National Standards Institute

2 Safety instructions

2.1 General information on this chapter

The product has been manufactured according to the generally accepted codes of
practice. However, there is still the danger of personal injury and damage to property
if you do not observe this chapter and the safety instructions in this documentation.
▶ Read this documentation completely and thoroughly before working with
the product.
▶ Keep this documentation in a location where it is accessible to all users at
all times.
▶ Always include the required documentation when you pass the product on to
third parties.

2.2 Intended use

The product is a hydraulic component.
You may use the product as follows:
• as proportional pressure reducing valve, direct operated, for the intended use in
explosive atmosphere.
The product is only intended for professional use and not for private use.
Intended use includes having read and understood this documentation completely,
especially chapter 2 "Safety instructions".
The valve is designed and constructed for the control of pressure outlet signals.
It complies with the requirements of the EU explosion protection directive
2014/34/EU. According to directive 2014/34/EU, the device group, category and
temperature class to which the valve corresponds are indicated in the "Area of
application" section of the data sheet.
For information on the device group, category and temperature class according to
the explosion protection directive 2014/34/EU, please refer to "Data sheet 29184-XE"
under "Information on explosion protection" and to the name plate of the valve.
Safety instructions
RE 29184-XE-B/04.16, 3DREP 6../..XE, Bosch Rexroth AG
7/48