Table of Contents
Advertisement
Disconnecting a TV Set
1.
Turn off the computer and the television set.
2.
Disconnect the television set from your computer.
• Before disconnecting the television set, be sure to turn off the computer
• After disconnecting the television set, set back the display property
Enjoying Dolby Digital Audio
2
Your computer is Dolby Digital compliant. With Dolby Digital compliant audio
equipment or headphones, you will have an audio output similar to a big theater.
Follow the steps below. (Refer to Audio System of Chapter 4 for connection.)
1.
In Setup dialog box, click Audio tab. (Refer to the steps in Using Parental
Control section to open the Setup dialog box.)
2.
Select Digital (S/PDIF) out to External Processor, then, click OK.
WinDVD is equipped with Dolby Headphone
enjoy Dolby sound just by connecting normal headphones. To set this
function, follow the steps below:
Refer to the online help of WinDVD for more information.
Controlling Audio
You can control the output volume of your computer with one of the following steps.
With the keyboard
Press Fn and F3 keys simultaneously to decrease the output volume.
Press Fn and F4 keys simultaneously to increase the output volume.
This operation also adjusts the Windows volume control below. For example, if you
press Fn + F3 keys, the volume level in Windows will decrease, too.
2-20
and the television set.
following the steps 4 to 5 in Connecting a TV Set section.
1. Connect your headphones to the computer and click the
subpanel button (
2. Select Headphones from the Listen on pull-down menu.
3. Click OFF button to enable Dolby Headphone. It turns ON.
TM
properties. You can
) and Audio Mode.
Advertisement
Table of Contents
