Table of Contents
Advertisement
6. Repeat steps 4 and 5 for CALL 2, CALL 3 and
CALL 4 entries.
7. When finished, press the
ous times to exit to the radio mode.
9.11.3 Enable/Disable Auto POS Polling
1. Press the
pear.
2. Press the
POS POLLING ", then press the
key.
3. Press the
TION ", then press the
4. Select " START " to enable transmissions to
the stations or " STOP " to disable transmis-
sions to stations.
5. Press the
6. Press the
to the radio mode.
When the radio receives position reports from
a called vessel the display will show the image
to the right also NMEA 0183 DSC and DSE
sentences are outputted to a connected GPS
Chart Plotter or PC.
GX1700E
key. The " DSC Menu " will ap-
/
key to select " AUTO
/
key to select the " ACTIVA-
soft key.
soft key.
soft key numerous times to exit
NOTE
soft key numer-
INDIVIDUAL
Group
All Ships
POS Request
POS Report
Auto POS Polling
soft
SELECT
-Auto POS Polling-
ACTIVATION
Select Address
SELECT
Received POS REPORT
Category:Routine
TO WPT
-DSC Menu-
-DSC Menu-
Individual
QUIT
Group
All Ships
POS Request
POS Report
AUTO POS POLLING
SELECT
QUIT
-Auto POS Polling-
START
QUIT
Stop
ENT
QUIT
Name:Horizon
ID:123456789
Since: 01:03
-POS INFO-
SAVE
QUIT
Page 67
Advertisement
Table of Contents
