Breville the BrevillePrecision Brewer Thermal Instruction Book page 21

PROBLEM POSSIBLE CAUSE
•
Unit does not use the
full amount of water
in the water tank
•
Unit brewing slow
•
Uneven coffee bed
•
Pourover adaptor is
lifted out of position
when brewing
•
A small amount of
water remains in the
tank after brewing
There is a blockage in the system.
There is a blockage in the system.
Showerhead may not be attached/
secured properly.
pourover mode not selected.
This is part of the normal operation.
WHAT TO DO
•
Empty the tank, remove any blockage,
and wipe, inspect and clean any
obstruction and coffee/fibre/dirt build
up from the mesh filter at the bottom
of the water tank.
•
Cool down and run FAST cycle
with 1L.
•
Descale the unit.
•
Call Breville Consumer Support if
problem persists.
•
Empty the tank, remove any blockage,
and wipe, inspect and clean any
obstruction and coffee/fibre/dirt build
up from the mesh filter at the bottom
of the water tank.
•
Cool down and run FAST cycle
with 1L.
•
Descale the unit.
•
Call Breville Consumer Support if
problem persists.
•
Check the attachment of the
showerhead locking ring and shower
head.
•
Clean showerhead from any blockage
or scale buildup.
•
Go to mybrew mode and select 'on'
to engage pourover mode.
•
No user action required, continue
normal use.
21