Honeywell VISTA-128FBPT User Manual page 70

FCC PART 68 INFORMATION
This equipment complies with Part 68 of the FCC rules. A label is located on the front cover of
this equipment containing the FCC registration number and the Ringer Equivalence Number
(REN). You must, upon request, provide the following information to your local telephone
company: USOC Jack Type: RJ31X; REN: 0.7B. The REN is used to determine the quantity of
devices which may be connected to the telephone line. Excessive RENs on the telephone line
may result in the devices not ringing in response to an incoming call. The sum of RENs should
not exceed five (5.0). For more information, contact the local telephone company. This equipment
cannot be used on public coin phone service provided by the telephone company. Connection to
party line service is subject to state tariffs.
Harm to the Network: If this equipment causes harm to the telephone network, the
telephone company will notify you in advance that the temporary discontinuance of service
may be required. But if advance notice isn't practical, the telephone company will notify the
customer as soon as possible. Also, you will be advised of your right to file a complaint with
the FCC if you believe it is necessary.
Notification of Changes in Telephone Company Equipment: The telephone company
may make changes in its facilities, equipment, operations or procedures that could affect the
operation of the equipment. If this happens, the telephone company will provide advance
notice in order for you to make necessary modifications to maintain uninterrupted service.
Repairs or Returns: If trouble is experienced with this equipment, for repairs or warrantly
information, contact: www.honeywell.com/security/hsc/resources/wa.
If the equipment is causing harm to the telephone network, the telephone company may
request that you disconnect the equipment until the problem is resolved. Repairs should be
made only by a qualified factory representative.
Party Lines: This equipment must not be used on party lines.
Alarm Equipment: You should ensure that this equipment does not disable alarm equipment
in installations where the alarm equipment utilizes the same telephone network connection as
this equipment. If you have questions about what will disable the alarm equipment, consult
your telephone company or a qualified installer.
Electrical Safety Advisory: Telephone companies report thata electrical surges, typically
lighting transients, are very destructive to customer terminal equipment connected to AC
power sources. This has been identified as a major nationwide problem. A commercially
available, power surge arrestor is recommended for use with this equipment to minimize
damage in the event of an electrical surge.
– 70 –
National Security Systems (800)457-1999
http://nationalsecuritysystems.com