Brush Retracted - Miele Classic C1 Flex Operating Instructions Manual

en
Your vacuum cleaner is fitted with one
of the following suction tubes, depend-
ing on model:
- EasyLock suction tube
- Comfort telescopic suction tube
Assembling the EasyLock suction
tube (Fig. 03)
 Hold the suction tube by the connec-
tion piece and push it into the second
suction tube, turning it clockwise or
anti-clockwise until it clicks into posi-
tion.
 Slide the connection piece upwards
until it clicks into position.
Connecting the handle to the suction
tube (Fig. 04)
 Insert the handle into the suction
tube until it clicks into position. To do
this, line up the guides on the two
pieces.
 To detach the handle from the suc-
tion tube, press the release catch
and pull the handle out of the suction
tube, twisting it slightly as you do so.
Adjusting the telescopic suction tube
(Fig. 05)
One part of the telescopic suction tube
is packed inside the other, and it can be
adjusted to suit your height for comfort-
able vacuuming.
 Grasp the release mechanism and
adjust the telescopic suction tube to
the required length.
38
Connecting the suction tube to the
floorhead (Fig. 06)
 Push the suction tube into the floor-
head and turn it clockwise or anti-
clockwise until it clicks into position.
 To separate the suction tube from
the floorhead press the release but-
ton and pull the suction tube away
from the floorhead, twisting it slightly
as you do so.
Adjusting the floorhead (Fig. 06)
This vacuum cleaner can be used for
daily cleaning of carpets, rugs and ro-
bust hard floors.
Miele offers a range of other floorheads,
brushes and accessories for other types
of
flooring and special applications (see
"Optional accessories").
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
 Clean even hard floors which are not
susceptible to scratching, as well as
flooring with gaps or deep crevices
in it with the brush protruding:
 Press the  footswitch.
Vacuum carpets and rugs with the

brush retracted:

 Press the  footswitch.
Activating the timestrip® filter
change indicator on the exhaust filter
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (Fig.
07):