Maytag JEA8120AD Technical Information page 7

Control Testing Procedures
To avoid risk of electrical shock, personal injury or death; disconnect power to range before servicing, unless
testing requires power.
Feature
Display Test
Illuminates all lamps on the
control.
Control Lockout
Disables the touch keypad
control and locks the oven
cavity door.
Relay Logic for EOC III
NOTE: Subsequent changes implemented after the release of this technical sheet may have altered the parameters
identified in this chart.
- OFF
O - ON
- CYCLING
- ON OR OFF (DETERMINED BY
USER INPUT)
COOKING MODE
IDLE
BAKE RAPID PREHEAT
BAKE PREHEAT
BAKE
HIGH BROIL PREHEAT
HIGH BROIL
LOW BROIL PREHEAT
LOW BROIL
CLEAN PREHEAT
CLEAN
KEEP WARM PREHEAT
KEEP WARM
CONVECT ROAST PREHEAT
CONVECT ROAST
CONVECT BAKE RAPID PREHEAT
CONVECT BAKE PREHEAT
CONVECT BAKE
CONVECT PASTRY RAPID PREHEAT
CONVECT PASTRY PREHEAT
CONVECT PASTRY
THAW-SERVE
DRYING PREHEAT
DRYING
RAPID PROOFING
STANDARD PROOFING
*Convection fan stops when oven door is opened.
March 2006
© 2006 Maytag Services
!
WARNING
Access Procedure
Press the Setup pad, then press the right ATM
pad until SERVICE displays. Press the left
ATM pad to select SERVICE menu options.
Press the Back and Setup pads
simultaneously for 5 seconds to lock.
INDEX
Press and hold the Back and Enter pads for 5
seconds to enter SERVICE menu options. Press
the right ATM pad to scroll to DISPLAY TEST.
Press the left ATM pad. Press Setup to exit.
Press the Back and Setup pads simultaneously for
5 seconds to unlock.
r r r r
O
r r r
O
r r r
r r r
O
r r r
r r r
O
r r r
r r r
r
r
r r r
O
r r r
O
r r r
O*
r r
O
r r r
O
r r r
r r r
O O*
r r
O O*
r r
O*
r r
r r
O
r r r
r r r
O O
r r
O
r r r
7
Modification Procedure
r
r
16026928