Functional Description - Makita 9031 Instruction Manual

FUNCTIONAL
DESCRIPTION
1. Lock button
2. Switch trigger
ASSEMBLY
1
2
1. Side grip
2. Grip holder
CAUTION:
• Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Switch action
001282
1
CAUTION:
• Before plugging in the tool, always check to see that the switch trigger
actuates properly and returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release the switch trigger to
stop.
For continuous operation, pull the switch trigger and then push in the lock but-
2 ton.
To stop the tool from the locked position, pull the switch trigger fully, and then
release it.
Speed adjusting dial
The belt speed can be infinitely adjusted between 3.3 m and 16.6 m per sec-
ond by turning the speed adjusting dial to a given number setting from 1 to 6.
Higher speed is obtained when the dial is turned in the direction of number 6,
lower speed is obtained when it is turned in the direction of number 1. Select
the proper speed for the workpiece to be sanded.
CAUTION:
• The speed adjusting dial can be turned only as far as 6 and back to 1. Do
not force it past 6 or 1, or the speed adjusting function may no longer
work.
CAUTION:
• Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
Installing side grip
For your own safety, always use the side grip. Install it by screwing it firmly on
001284
the grip holder. The side grip can be pivoted for easy operation.
5