Makita 9031 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Sander
  5. 9031
  6. Instruction manual
Makita 9031 Instruction Manual

Makita 9031 Instruction Manual

Hide thumbs Also See for 9031:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Belt Sander
MODEL 9031
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DOUBLE
INSULATION
M A N U A L
001281

Advertisement

Table of Contents
loading

Related Manuals for Makita 9031

Summary of Contents for Makita 9031

  • Page 1 Belt Sander MODEL 9031 001281 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    Responsible manufacturer: faces. Makita Corporation Anjo Aichi Japan Power supply The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply.

  • Page 3: General Safety Rules

    GENERAL SAFETY RULES GEA001-3 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.
  • Page 4 19. Store idle power tools out of the reach of chil- Always use safety glasses or goggles. Ordinary dren and do not allow persons unfamiliar with eye or sun glasses are NOT safety glasses. the power tool or these instructions to operate Hold the tool firmly with both hands.

  • Page 5: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action 001282 CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF”...
  • Page 6 Cleaner sanding operations can be performed by connecting the belt sander to 001287 Makita vacuum cleaner. 1. Nozzle cap 2. Nozzle When connecting to Makita vacuum cleaner, an optional hose 28 mm in inner 001288 diameter is necessary. 1. Nozzle 2. Hose 19 3.

  • Page 7: Operation

    When connecting to Makita dust collector (Model 420S), the hose of the dust 001289 collector is not necessary. You can connect the belt sander directly to the optional hose 28. 1. Nozzle 2. Hose 19 3. Dust collector OPERATION CAUTION: •...
  • Page 8 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.

Table of Contents