Advertisement
7. Help
The power / linking LED Indicator on the parent unit does not turn on.
•
Check whether the parent unit is powered on.
•
Check whether the batteries are correctly installed and not drained.
•
Connect the parent unit to the power supply to recharge it.
The power / linking LED indicator on the parent unit flashes.
•
The parent unit and the baby unit may be out of range with each other.
Reduce the distance between the units. Make sure the distance between
the parent unit and baby unit is less than 300 metres (1000 feet).
•
The baby unit may be powered off. Press and hold
power it on.
Unable to hear the sound or baby cry from the parent unit.
•
The volume level in the parent unit may be set too low. Increase the volume
level of the parent unit. Refer to section 6.3 for volume level settings.
•
The parent unit and the baby unit may be out of range with each other.
Make sure the distance between the parent unit and baby unit is less than
300 metres.
The Digital Audio Baby Monitor system produces a high-pitched noise.
•
The parent unit and the baby unit are too close with each other. Move the
baby and parent units further apart. Make sure the distance between the
parent unit and baby unit is less than 300 metres (1000 feet).
•
The speaker volume of the parent unit may be set too high. Decrease the
volume of the parent unit. Refer to section 6.3 for volume level settings.
For more support, you can reach us at: motorolanursery.com/support or
+1-800-763-2207 (United States and Canada)
Help
on the baby unit to
11
Advertisement
