Honeywell HCM-710 Series Manual page 3

SETTING UP YOUR HUMIDIFIER
Remove from box
Remove packaging material. Remove and set aside instruction manual.
Recycle box and packaging materials or save box for end of season storage.
Soak Filter
1
- Remove Grille
Remove grille/mo-
tor housing and set
aside.
3
- Replace Filter
Place filter back in
humidifier
Placement
Select a firm, level location at least 6" (15cm) from any walls
for proper airflow. Place the humidifier on a water-resistant
surface, as water can damage furniture and some flooring.
Kaz USA, Inc. will not accept responsibility for property damage
caused by water spillage.
2
- Soak
Remove filter from
base and soak in
cool water
4
- Replace Grille
Place grille/motor hous-
ing back on the unit.
Do not squeeze or wring out
filter. This will damage the
filter and the unit will not
operate properly
3