Setting Up Wpa2-Psk Security - NETGEAR RangeMax WN311T User Manual

NETGEAR RangeMax™ NEXT Wireless PCI Adapter WN311T User Manual
Note: Larger encryption keys require more processing and may slow the
communications response times.
4. Select Create with Passphrase and enter the passphrase. The configuration utility will
automatically generate the WEP keys.
Note: The characters are case sensitive. Be sure to use the same passphrase for all the
wireless devices in the network.
If the passphrase method is not available in the other devices, you must manually enter the
keys to match exactly what is in the access point and other 802.11b/g wireless devices.
5. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the configuration utility.

Setting up WPA2-PSK Security

Follow the steps below to configure WPA2-PSK Security.
1. Run the WN311T Smart Wizard.
a. Make sure the WN311T software is installed and the WN311T is properly installed in the
PCI slot in your computer.
Network Connections and Wireless Security
v1.0, May 2006
-11