Economy Control Switch; Dc Protector - Yamaha EF2800i Owner's Manual

Hide thumbs Also See for EF2800i:
Table of Contents

Advertisement

1
2
763-124a
763-188a
2
1
763-006
AE00787

Economy control switch

1 "I" (ON)
When the economy control switch is turned "I" (ON),
the economy control unit controls the engine speed
according to the connected load. The results are bet-
ter fuel consumption and less noise.
2 "3" (OFF)
When the economy control switch is turned "3" (OFF),
the engine runs at the rated r/min (3,600 r/min)
regardless of whether there is a load connected or
not.
TIP
The economy control switch must be turned to "3"
(OFF) when using electric devices that require a large
starting current, such as a compressor or a submers-
ible pump.
AE00780

DC protector

The DC protector turns off automatically when electric
device being connected to the generator is operating
and current above the rated flows. To use this equip-
ment again, turn on the DC protector by pressing its
button to
"I" (
RESET
"I" (RESET)
1
Direct current is output. (This is the default position.)
"3" (OFF)
2
Direct current is not output.
NOTICE
Reduce the load of the connected electric device
below the specified rated output of the generator
if the DC protector turns off. If the DC protector
turns off again, stop using the device immediately
and consult a Yamaha dealer.
– 8 –
)
.

Advertisement

Table of Contents
loading

Table of Contents