Connections; Jacks And Terminals; Connecting Audio Devices ([Aux In] Jack, Aux Out [R] [L/L+R] Jacks) - Yamaha AvantGrand N1X Owner's Manual

CAUTION
Before connecting the instrument to other electronic components, turn off the power to all the components. Before turning the
power on or off to all components, set all volume levels to minimum (0). Otherwise, damage to the components, electrical
shock, or even permanent hearing loss may occur.

Jacks and Terminals

Refer to the "Panel Controls and Terminals" on page 10 for information on the location of the jacks and
terminals.
Front (keyboard side) 
(Left side of the front surface
below the keyboard)
q AUX OUT [R] [L/L+R] jacks .........................................page 36
w [AUX IN] jack ...........................................................See below.
e MIDI [OUT] [IN] terminals ............................................page 36
r [USB TO HOST] terminal .............................................page 38
t [USB TO DEVICE] terminal..................................pages 31, 39

Connecting Audio Devices ([AUX IN] jack, AUX OUT [R] [L/L+R] jacks)

Playing a Portable Audio Player with the Built-in Speakers—[AUX IN] jack
You can connect the headphone jack of a portable audio player to the instrument's [AUX IN] jack, letting you hear
the sound of that audio player through the built-in speakers of the instrument.
NOTICE
To avoid damage to the devices, first turn on the power to the external device, then to the
instrument. When turning off the power, first turn off the power to the instrument, then to the
external device.
Instrument
Phone plug
(stereo mini)

Connections

q w
t
USB TO DEVICE
audio player
Audio cable
Audio signal
e
Portable
Headphone jack
Phone plug
(stereo mini)
r
 Rear
NOTE
Use audio cables and adaptor plugs having
no (zero) resistance.
N1X • 35
Owner's Manual