Indicator
Name
Collision
Mitigation
Braking
System
TM
(CMBS
TM
)
Indicator
*
* Not available on all models
On/Blinking
Comes on when the CMBS
●
system shuts itself off.
Comes on if there is a problem
●
with the CMBS
TM
.
Indicator may comes on
●
temporarily when the Maximum
Load Limit is exceeded.
Explanation
TM
Stays on - The temperature inside the
●
camera is too high. Use the climate control
system to cool down the camera. The
system activates when the temperature
inside the camera cools down.
2 Front Sensor Camera
Indicator may comes on temporarily when
●
passing through an enclosed space, such
as tunnel.
The area around the radar sensor is
●
blocked by dirt, mud, etc. Stop your
vehicle in a safe place, and wipe it off with
a soft cloth.
Have your vehicle checked by a dealer if
●
the indicator does not go off even after
you cleaned the radar sensor.
2 Collision Mitigation Braking
System
TM
(CMBS
Make sure the total load is within the
●
Maximum Load Limit.
2 Maximum Load Limit P. 445
Stays on constantly - Have your vehicle
●
checked by a dealer.
uuIndicatorsu
Message
*
P. 477
TM
)
*
P. 541
*
—
101