D-Link DSL-2750U Quick Installation Manual
Wireless adsl2+ router with 3g/lte/ethernet wan support and usb port
Hide thumbs
Also See for DSL-2750U:
- User manual (210 pages) ,
- Quick installation manual (42 pages) ,
- Technical support setup procedure (19 pages)
Related Manuals for D-Link DSL-2750U
Summary of Contents for D-Link DSL-2750U
- Page 1 Quick Installation Guide DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support and USB Port...
-
Page 2: Before You Begin
If any of the items are missing, please contact your reseller. The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product. -
Page 3: System Requirements And Equipment
DSL-2750U Quick Installation Guide System Requirements and Equipment A computer with any operating system that supports a web browser. • A web browser to access the web-based interface of the router: • ◦ Apple Safari 5 and later ◦ Google Chrome 5 and later ◦... -
Page 4: Supported Usb Modems
GSM modems Alcatel X500 • D-Link DWM-152C1 • D-Link DWM-156A6 • D-Link DWM-156A7 • D-Link DWM-156C1 • D-Link DWM-157B1 • D-Link DWM-157B1 (Velcom) • D-Link DWM-158D1 • Huawei E150 • Huawei E1550 • Huawei E156G • Huawei E160G • Huawei E169G •... - Page 5 DSL-2750U Quick Installation Guide CDMA modems Airplus MCD-650 • Airplus MCD-800 • AnyDATA ADU-300A • AnyDATA ADU-500A • AnyDATA ADU-510A • Huawei EC306 • ZTE AC5710 • ZTE AC5730 • LTE modems Huawei E3131 • Huawei E3272 • Huawei E367 •...
-
Page 6: Pc With Ethernet Adapter
DSL-2750U Quick Installation Guide CONNECTING TO PC PC with Ethernet Adapter 1. Make sure that your PC is powered off. 2. Connect an Ethernet cable between any of four Ethernet ports located on the back panel of the router and the Ethernet port of your PC. - Page 7 DSL-2750U Quick Installation Guide Obtaining Address Automatically in OS Windows XP 1. Click the Start button and proceed to the Control Panel > Network and Internet Connections > Network Connections window. 2. In the Network Connections window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
- Page 8 DSL-2750U Quick Installation Guide 4. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. Click the OK button. 5. Click the ОК button in the connection properties window. Now your computer is configured to obtain an IP address automatically.
- Page 9 DSL-2750U Quick Installation Guide Obtaining Address Automatically in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by...
- Page 10 DSL-2750U Quick Installation Guide 6. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. Click the OK button. 7. Click the OK button in the connection properties window. Now your computer is configured to obtain an IP address automatically.
-
Page 11: Pc With Wi-Fi Adapter
DSL-2750U Quick Installation Guide PC with Wi-Fi Adapter 1. To connect via USB modem: connect your USB modem to the USB port located on the left side panel of the router. If you need to connect or change a USB modem to another one when the router is powered on, power off the router, connect the modem to the USB port, and power on the router. -
Page 12: Configuring Wi-Fi Adapter In Os Windows Xp
3. Search for available wireless networks. 4. In the opened Wireless Network Connection window, select the wireless network DSL-2750U and click the Connect button. 5. In the opened window, enter the network key (see WPS PIN on the barcode label on the bottom panel of the device) in the Network key and Confirm network key fields and click the Connect button. -
Page 13: Configuring Wi-Fi Adapter In Os Windows 7
DSL-2750U Quick Installation Guide Configuring Wi-Fi Adapter in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by... - Page 14 Quick Installation Guide 6. In the opened window, in the list of available wireless networks, select the wireless network DSL-2750U and click the Connect button. 7. In the opened window, enter the network key (see WPS PIN on the barcode label on the bottom panel of the device) in the Security key field and click the OK button.
-
Page 15: Configuring Router
DSL-2750U Quick Installation Guide CONFIGURING ROUTER Connecting to Web-based Interface Start a web browser. In the address bar of the web browser, enter the IP address of the router (by default, the following IP address is specified: 192.168.1.1). Press the Enter key. - Page 16 DSL-2750U Quick Installation Guide When the web-based interface is accessed the next time and after, the login page opens. Enter the username (admin) in the Login field and the password you specified in the Password field, then click the Enter button.
- Page 17 DSL-2750U Quick Installation Guide After successful registration the Home / Information page opens. The page displays general information on the router and its software.
- Page 18 DSL-2750U Quick Installation Guide The web-based interface of the router is multilingual. If you need to select another language for the web-based interface, place the mouse pointer over the English caption in the top part of the page and select a language from the menu displayed.
-
Page 19: Configuring Connection To The Internet
DSL-2750U Quick Installation Guide Configuring Connection to the Internet You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP). Make sure that you have obtained all necessary information prior to configuring your WAN connection. - Page 20 DSL-2750U Quick Installation Guide 6. If your operator requires to specify the access point name, in the USB modem section, fill in the APN field. 7. If your operator has provided the address of the DNS server, in the IP section, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field.
-
Page 21: Wan Connection
DSL-2750U Quick Installation Guide 3G WAN Connection If the PIN code check is enabled for the SIM card inserted into your USB 3G/LTE modem, then prior to creating a 3G WAN connection, proceed to the modem / PIN menu and enter the PIN code on the page displayed... - Page 22 DSL-2750U Quick Installation Guide If you need to specify other settings, in the PPP section, enter authorization data provided by your operator (the username (login) in the Username field and the password in the Password and Password confirmation fields), or select the Without authorization checkbox if authorization is not required.
-
Page 23: Adsl Wan Connection
DSL-2750U Quick Installation Guide ADSL WAN Connection Please reboot the router after creating an ADSL WAN connection. 1. Go to the Net / WAN page, select the WAN connection and click the Delete button. Save the settings and wait until the router is rebooted. - Page 24 DSL-2750U Quick Installation Guide 7. For connection of PPPoA or PPPoE type: in the PPP section, enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password and Password confirmation fields), or select the Without authorization checkbox if authorization is not required.
- Page 25 DSL-2750U Quick Installation Guide For connection of IPoA or Static IP type: in the IP section, fill in the IP Address, Netmask, Gateway IP address, and Primary DNS server fields. 10. For connection of Dynamic IP type: if your ISP has provided the address...
- Page 26 DSL-2750U Quick Installation Guide For connection of Static IPv6 type: in the IP section, fill in the IPv6 address and Gateway IPv6 address fields. 12. For connection of Dynamic IPv6 type: if your ISP has provided the address of the DNS server, in the IP section, deselect the Obtain DNS server addresses automatically checkbox and fill in the Static primary DNS server field.
-
Page 27: Ethernet Wan Connection
DSL-2750U Quick Installation Guide Ethernet WAN Connection 1. Go to the Advanced / EtherWAN page. Place the mouse pointer on the router's LAN port that will be used as the WAN port and left-click it. Click the Apply button. 3. Go to the Net / WAN page, select the WAN connection and click the Delete button. - Page 28 DSL-2750U Quick Installation Guide 8. If your ISP uses MAC address binding, in the Ethernet section, in the MAC field, enter the MAC address registered by your ISP upon concluding the agreement. To set the MAC address of the network...
- Page 29 DSL-2750U Quick Installation Guide 9. For connection of PPPoE type: in the PPP section, enter authorization data provided by your ISP (the username (login) in the Username field in the Password and Password confirmation and the password fields), or select the Without authorization checkbox if authorization is not required.
- Page 30 DSL-2750U Quick Installation Guide For connection of Static IP type: in the IP section, fill in the IP Address, Netmask, Gateway IP address, and Primary DNS server fields. 12. For connection of Dynamic IP type: if your ISP has provided the address...
- Page 31 DSL-2750U Quick Installation Guide For connection of Static IPv6 type: in the IP section, fill in the IPv6 address and Gateway IPv6 address fields. 14. For connection of Dynamic IPv6 type: if your ISP has provided the address of the DNS server, in the IP section, deselect the Obtain DNS server addresses automatically checkbox and fill in the Static primary DNS server field.
-
Page 32: Configuring Local Area Network
DSL-2750U Quick Installation Guide Configuring Local Area Network Go to the Net / LAN page. If needed, change the IP address of the router's LAN interface and the mask of the local subnet in the IP Address and Netmask fields. -
Page 33: Saving Settings To Non-Volatile Memory
DSL-2750U Quick Installation Guide Saving Settings to Non-volatile Memory In order to avoid losing the new settings upon hardware reboot (accidental or intentional power-off of the device), it is recommended to save the settings to the non-volatile memory of the router. -
Page 34: Technical Support
Quick Installation Guide TECHNICAL SUPPORT You can find software updates and user documentation on our website. D-Link provides its customers with free support within the product's warranty period. Customers can contact the technical support group by phone or by e- mail/Internet.