Initializing Tpm For Bitlocker Users; Initializing The Tpm 1.2 For Txt Users; Initializing The Tpm 2.0 For Txt Users - Dell EMC PowerEdge M640 Installation And Service Manual

Figure 56. Installing the TPM
Next steps
1. Install the system board.
2. Follow the procedure listed in After working inside your system.

Initializing TPM for BitLocker users

Steps
Initialize the TPM.
For more information, see Steps to initilize the TPM for different windows server operating systems.
The TPM Status changes to Enabled, Activated.

Initializing the TPM 1.2 for TXT users

Steps
1. While booting your system, press F2 to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3. From the TPM Security option, select On with Pre-boot Measurements.
4. From the TPM Command option, select Activate.
5. Save the settings.
6. Restart your system.
7. Enter System Setup again.
8. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
9. From the Intel TXT option, select On.

Initializing the TPM 2.0 for TXT users

Steps
1. While booting your system, press F2 to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3. From the TPM Security option, select On.
4. Save the settings.
5. Restart your system.
6. Enter System Setup again.
7. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
Installing and removing system components 65