Advertisement
LIMITATIONS STATEMENT
Signals sent by wireless transmitters may be blocked or reflected by metal objects before they reach the alarm receiver.
Even if the signal path has been recently checked during a weekly test, blockage can occur if a metal object somehow
blocks the signal path.
Wireless button type transmitters that have visual and audible indications of status must be used to confirm that the
desired action (such as arming) has occurred after pressing a function button on any of these transmitters. Be sure to
listen for appropriate audible and visual indications that such action has occurred. Otherwise, you could inadvertently
leave yourself or your premises unprotected.
External factors such as humidity, high or low temperatures, or constant activation of a programmed button may
reduce battery life in a given installation. If the button unit is used infrequently, activate it regularly (once per week)
to confirm operation. A button type transmitter will report a low battery condition to the alarm control when a low
battery status is detected.
FOR WARRANTY INFORMATION AND FOR DETAILS REGARDING THE LIMITATIONS OF THE ENTIRE ALARM SYSTEM,
REFER TO THE INSTALLATION INSTRUCTIONS FOR THE RECEIVER/CONTROL WITH WHICH THIS DEVICE IS USED.
FCC AND INDUSTRY CANADA STATEMENT
THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES AND RSS210 OF INDUSTRY CANADA. OPERATION IS SUBJECT
TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS
DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
THE USER SHALL NOT MAKE ANY CHANGES OR MODIFICATIONS TO THE EQUIPMENT UNLESS AUTHORIZED BY THE
INSTALLATION AND SETUP GUIDE OR THE USER GUIDE.
12800 Brookprinter Place,Poway, CA 92064
Copyright 2006 © Honeywell International Inc.
www.honeywell.com/security
‡K14395TŠ
‡K14395TŠ
‡K14395TŠ
‡K14395TŠ
K14395 6/06 Rev. A
Advertisement
