Table of Contents
Advertisement
Setup and Connections
Connecting Speakers to the TV
You can connect up to four additional speakers to the TV: two to the FRONT SPEAKER
terminal, and two to the REAR SPEAKER terminal.
1.
If necessary, remove the vinyl covering from the ends of the speaker wire and
twist the wire core.
2.
Open the lever on the speaker terminal.
3.
Insert the wire core into the hole. Be sure to connect the (+) to (+) and (-) to (-).
4.
Close the lever. Pull gently on the wire to see that it's connected securely.
To specify how you have set up your speakers, press MENU on the remote control and
choose Audio. Then choose Speakers... from the menu. For details, see the section
"Adjusting TV Controls" in this book.
Connecting Front (Main) Speakers
To connect external front speakers:
1.
Connect speakers to the FRONT SPEAKER terminal.
2.
Set the speaker switch (labeled FRONT SPEAKER) to EXT. to indicate you would
like to use the connected external speakers.
Connecting Rear Speakers
To connect rear speakers for surround sound effects:
1.
Connect speakers to the REAR SPEAKER terminal.
2.
Position the speakers behind you in your TV room. To improve the surround
sound effect, you may prefer to set or mount the speakers several feet off the
ground.
14
FRONT SPEAKER
+
+
R
L
_
_
+
+
R
L
_
_
REAR SPEAKER
INT.
FRONT SPEAKER
EXT.
TRANSMITTER OUT
R
L
LFE/SUB WOOFER
OUT
R
L
FIX/VARIABLE OUT
When connecting the
speaker wire, make sure
you connect the positive
(+) terminal on the TV to
the positive (+) terminal
on the speaker. One side
of the speaker wire is
usually marked with a
white stripe to help you
match the terminals
correctly. If the (+) and
(-) terminals are not
matched properly, the
speakers will not be "in
phase," causing
reduction in bass
frequencies.
Do not allow the wire
core to touch other wires
or terminals. Damage to
components could result
if the cores of two wires
touch.
Advertisement
Table of Contents
