Cleaning - Panasonic SR-SAT18 Operating Instructions Manual

O For cleaning, remove the Power Plug and ensure that the main body has cooled down.

Cleaning

O Be careful not to pull on the Packing attached to the main body (since this could result
in the Packing coming off or tearing).
O After washing, wipe with a dry cloth.
When using for the first time & on every use
After removing,
Wash using a soft sponge
and a mild washing up liquid.
Inner Pan Rice Scoop
<Do not use any of the following>
Metal scourers, nylon scourers
impregnated with an abrasive etc.
Benzine, thinner, polish, bleach,
antibacterial alcohol etc.
Dishwasher/dryer or dish dryer
Inner Pan
(P.8)
Wash using a mild washing up liquid.
Do not use as a washing up bowl.
( Since this may result in peeling of the inner coating.)
24
Mixed rice etc.
After using seasoning,
wash promptly
( since these can cause odours, )
putrefaction, or rust
Inner Lid Taste Steaming
Catcher Basket
Do not wash using
the scouring pad.
Clear Frame
Wipe with a well-wrung cloth.
O Water droplets may drop from the condensation outlet
onto the Clear Frame.
O Wipe off the water droplets
on the Clear Frame every
time after using the
appliance.
O Do not wash by pouring in
water etc.
Condensation
outlet
Lid Sensor
Inner Lid
Lid Sensor / Pan Sensor
Wipe with a well-wrung cloth.
O If the dirt is hard to remove, dab a
mild washing up liquid on a nylon
scourer and wipe gently.
Note
O
If the Warm Jar is used with dirt on the sensors, the rice
may burn or cook imperfectly.
Taste Catcher
Detach from the main body
and rinse under the tap.
O If the dirt is difficult to remove,
soak in water for a few
minutes and then rinse.
Q Removing
Holding the finger grip, press
down and then pull towards
you. Be careful to avoid
pulling on the Packing.
( Since this could result in
the Packing coming off
or tearing.
Q Attaching
Follow the reverse procedure to removing, and press in
securely. (P.11)
Inner Lid
Wash using a mild washing up liquid.
After using seasoning (for mixed rice etc.), please wash
promptly.
Packing
(Since these can cause odours, putrefaction, or rust.)
Q Removing
Pan Sensor
Q Attaching
Insert into the groove and press into the Outer Lid until
you hear a "click". (P.11)
Inner surfaces of Outer Lid / Packing
Wipe with a well-wrung cloth.
O Remove the Taste Catcher and wipe the inner surfaces
of the Outer Lid, the attaching portion of the Taste
Catcher and the Packing.
Dirt on Pan Sensor
)
P ress the button.
①
The Inner Lid tilts
( )
towards you.
If the Inner Lid fails
to tilt, hold down the
button, insert your
finger into the hole
and pull towards
you.
② P ull out.
25