Philips 40B1U5601H User Manual page 16

3. Setting in Windows11 for Windows
Hello
a. In the settings app click on
accounts.
b. Click on sign-in options in the
sidebar.
c. You need to set up a PIN code
before you're allowed to use
Windows Hello. Once you've
added this, the option for Hello
will unlock.
d. You'll now see which options
are available to set up under
Windows Hello.
e. Click on "Get started." The setting
is complete.
4. If you connect the USB cable from
"USB C1 " port of this monitor,
please enter OSD menu to make a
appropriate selection of "USB C1"
under the "KVM" layer.



 
 

Note
1. Please always go to Windows
official website to access the latest
information, the information in EDFU
is subject to change without further
notice.
2. Different regions have different
voltages, with inconsistent voltage
setting may cause water ripple when
using this webcam. Please make the
voltage setting same as the voltage
of your region.
3. This monitor has a webcam active
beacon that lights up when the
webcam is in use. There are four
brightness options, 0=OFF to
4=HI, default 1. You can press
the OSD button
14
  
    
  
to enter the