RCA DRC8335 Quick Start Manual page 2

DRC8335_QSG 1/2/07 9:09 AM
Setup
A. Connect the cables
Antenna
1.
* This connection only lets you watch cable, antenna or satellite programs. To watch output from the unit you must connect
the Audio Video cables.
B. Find the viewing channel
1. Press ON/STANDBY on the remote control
2. Turn on the TV. Select the input to which the unit is connected. You should see the
player menu as shown below.
C. Set the clock
1. From the player menu, press
2. Press or to highlight "System"and then press OK.
3. Press or to highlight "Clock"and then press OK.
4. Highlight "Year", "Month", "Day" and "Time" by pressing
5. Press OK and then set the value by press
6. Press OK after the setting is done. Press EXIT/CLEAR to exit from the setup menu.
Page 2
2. RF coaxial cable*
INPUT
Cable box
or to highlight "Setup"and then press OK.
or .
3. Audio Video cables
Cb/
Cr/
OUTPUT
or .
Other options:
• DVD/VCR + TV + satellite
receiver (refer to page 7 of
the user manual)
• DVD/VCR + TV + basic cable
box + audio receiver (refer
to page 7 of the user
manual)
4. AC 120V 60Hz
DVD/VCR
You only need the
highlighted keys to
complete the setup
procedures.