Change Wifi Settings From The Nighthawk M6 Web Page - NETGEAR MR6550 User Manual

The default password is printed on the product label. The password is case sensitive.
The home page displays.
4. Select Settings > General > WiFi Band .
The WiFi Options page displays.
5. Select 5GHz Only or select 6GHz Only.
Note: The 6GHz Only selection does not appear for the MR6150.
The Apply and Discard buttons display at the bottom of the page.
6. Click the Apply button.
A message displays telling you that to save this change, your device must restart
WiFi connections.
7. Click the Continue button.
Your settings are saved.

Change WiFi settings from the Nighthawk M6 web page

To specify WiFi settings on the Nighthawk M6 web page:
1. From a computer or WiFi device that is connected to the Nighthawk M6, launch a
web browser.
2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays.
3. Enter the administrator login password.
The default password is printed on the product label. The password is case sensitive.
The home page displays.
4. Select Settings > General > WiFi Band > More > 5GHz > Global Settings.
5. To allow the WiFi information to be displayed on the Nighthawk M6 home screen,
leave the WiFi Info on Home check box selected.
6. Click the Apply button.
A message displays to tell you that changing the WiFi info will temporarily cause
connectivity loss.
Your settings are saved.
Use Your Nighthawk M6
Nighthawk M6
32 User Manual