Miele H 340 Operating Instructions Manual page 61

. . , the indicator light above the tem-
perature selector flashes.
The indicator light above the tempera-
ture selector normally only flashes if:
– a pyrolytic programme has been se-
lected but the temperature selector is
not at the "." symbol.
– the temperature selector is at the
"." symbol and the function selec-
tor is not pointing to a pyrolytic func-
tion.
If it flashes at any other time there may
be a fault with the appliance (e.g. faulty
thermostat or the appliance has short
circuited). Call the Service Dept.
. . . If there has been a power failure,
and instead of the time of day
"0k00"and "AUTO" flash in the dis-
play?
All pre-set times have been deleted be-
cause of the power failure.
^ Enter the time of day again, and any
other times that you had pro-
grammed.
Correcting minor faults
. . . If you have turned the buzzer off
by pressing the "l" symbol and
"0k00" has appeared in the timer dis-
play?
Do not worry. This is not a fault!
The time of day will reappear shortly.
. . . The word "AUTO" flashes in the
timer display.
The buzzer was switched off by press-
ing the "g" or ")" buttons.
^ Press the "i" button.
The appliance is ready for use again.
61